Shandong Hengyang New Materials | Geosynthetics plant, Dezhou Geomembrane · Geotextile · Composite liner · GCL Hotline +86 156 8951 2579(Mr. Zhang) 中文EN
INSIGHTS

Notes from selection, installation and testing

Practical answers to questions that come up on real projects: how thickness is decided, how welds are tested, what changed in the standard. One topic per note.

Standard answer summary

Practical notes on geomembrane selection, weld testing, GB/T 17643-2025 and landfill liner specification, wr. Maintained by the Hengyang technical department; values follow the current standard, design document and batch report. Call +86 156 8951 2579 (Mr. Zhang).

Source: Hengyang technical department | Updated: 2026-11-20

Thickness is not “the thicker the better”: how to use 0.5 / 1.0 / 1.5 / 2.0 mm

Thickness follows head, base, cover and design. Write the four conditions down so quotation and acceptance use the same basis.

Welding temperature, speed and pressure: how to set them

Do not copy one number. Trial-weld by membrane grade, thickness and ambient temperature, then lock temperature, speed and pressure.

Seam testing: air pressure, vacuum or spark test

Each method has a job: air pressure checks the dual-track channel, vacuum checks single seams and details, spark testing scans large areas.

Base preparation: stones, roots and moisture

The base is the first structure under the liner. Sharp objects, roots and standing water will puncture or hollow a thick membrane.

Anchor trench: size, backfill and slope fixing

An anchor trench is not a hole with membrane buried in it. Width, depth, backfill and drainage decide whether the liner slides.

Composite geomembrane and GCL: which one to choose

Composite liner blocks water with the membrane; GCL relies on bentonite self-healing. One controls seams, the other suits irregular shapes.

Truck loading and roll length: how to reduce freight

Freight is not just tonnage. Roll length, roll weight, width limits and unloading decide how much fits and whether the site can handle it.

Tender documents: test reports, certificates and project references

A tender is more than a price. Product standard, batch reports, certificates, references and service commitments must agree.

Sampling, sealed samples and batch traceability

Sampling is not cutting a random piece. Location, quantity, labelling and storage decide whether the report represents the batch.

Acceptance file: seam records, repairs and as-built drawings

Acceptance depends on an evidence chain: material, seams, repairs, testing and as-built drawings must line up.

Geomembrane and waterproofing membrane are the same material

In Chinese projects the same HDPE sheet is called tu gong mo in tenders and fang shen mo on site. The difference is documentation, not product.

1.0 mm versus 1.5 mm geomembrane

Thickness is not a comfort setting. It changes puncture resistance, welding tolerance and cost per square metre. Here is how projects decide.

Two weld tests that decide whether a liner holds

Air-pressure testing for double-track hot wedge seams, vacuum box for extrusion welds and patches. What each method finds, and what it misses.

The new geomembrane standard, in plain terms

GB/T 17643-2025 replaces the 2011 edition from 1 November 2025. Grade designations, index requirements and test methods moved — here is what buyers should check.

Why a geomembrane quote moves

Resin grade, standard, thickness and quantity explain most of the difference between quotes. A short guide to comparing them properly.

Landfill liner: material, thickness and the details that leak

MSW landfill lining normally uses a double liner: 1.5—2.0 mm HDPE over GCL. The specification is the easy part; base preparation and weld records decide the result.

HDPE and LDPE liner: the difference is not the name

HDPE gives stiffness, puncture resistance and weathering; LDPE is softer and follows deformation. Project liners normally use HDPE.

Bentonite liner: fast to lay, detailed at the joints

GCL needs no hot-wedge welding, but a smooth base, correct overlap direction, bentonite powder and prompt cover are essential.

The geotextile under the liner is not optional

A cushion geotextile separates the membrane from sharp base material. It costs far less than extra thickness or a future repair.

Slope anchor trench: where liner sliding starts

Trench width, depth, compacted backfill and drainage decide whether the liner stays on the slope.

Leak location: what the electrical survey can find

Electrical leak location scans a large liner quickly, but needs a conductive subgrade and full coverage. It does not replace weld pressure testing.

Tailings containment: thickness, drainage and slope stability

A tailings facility is not a pond. The liner faces high head, fine tailings and long-term loading; thickness and drainage must be designed together.

Fish pond lining: 0.5 mm or 1.0 mm

A smooth soil base in shallow water can use 0.5–0.75 mm. Deeper ponds, gravel bases or mechanical cleaning favour 1.0 mm and above.

Width and roll length: keep seams where you can control them

Set width and roll length from the laying direction, transport limits and welding capacity. Fewer seams is better, but not at the cost of handling.

Send us your project conditions

We reply with datasheets, test reports and a quotation within one business day.

Request a quotationEmail us
Call Top