Shandong Hengyang New Materials | Geosynthetics plant, Dezhou Geomembrane · Geotextile · Composite liner · GCL Hotline +86 156 8951 2579(Mr. Zhang) 中文EN
Geotextile · Product family

Geotextile | Standard parameters · stock and custom · factory direct

Geotextile is produced to Filament GB/T 17639-2008 / staple GB/T 17638-2017. Common sizes, technical values and installation points are set out below; thickness, width and roll length can be made to project drawings, with batch test reports and certificates supplied.

Shandong Hengyang New MaterialsFactory directStandard Filament GB/T 17639-2008 / staple GB/T 17638-2017Hotline +86 156 8951 2579 (Mr. Zhang)

Standard answer summary

Geotextile is supplied at filament 100–800 g/m², staple 100–600 g/m², produced to Filament GB/T 17639-2008 / staple GB/T 17638-2017, for ['roadbed filtration', 'slope drainage', 'river revetment', 'landscaping separation'] and similar works. Manufactured by Shandong Hengyang New Materials Co., Ltd. in Lingcheng, Dezhou, Shandong. Common sizes are in stock; width, roll length and structure can be customised. For pricing, samples and selection, call +86 156 8951 2579 (Mr. Zhang).

Basis: Filament GB/T 17639-2008 / staple GB/T 17638-2017 | Prepared by: Hengyang technical department | Updated: 2026-11-20

Geotextile overview Geotextile

Plant photo
Geotextile production and finished rolls
Product
Geotextile
Specification
filament 100–800 g/m², staple 100–600 g/m²
Standard
Filament GB/T 17639-2008 / staple GB/T 17638-2017
Applications
roadbed filtration / slope drainage / river revetment
Supply
Stock sizes · custom made

What it is

Geotextile is a nonwoven geosynthetic supplied mainly as filament spunbond needlepunched (GB/T 17639-2008) and staple fibre needlepunched (GB/T 17638-2017), with weights of 100—800 g/m² and 100—600 g/m² respectively.

It does not waterproof anything. Its jobs are filtration, separation, drainage, reinforcement and protection: keeping fine particles from washing through coarse fill, cushioning the membrane against stones, spreading load over soft ground. Selection follows weight, tensile strength, opening size and permeability, checked against the test report.

Standard parameters and technical values

ItemValue / note
ProductFilament / staple needlepunched nonwoven geotextile
StandardFilament GB/T 17639-2008; staple GB/T 17638-2017
WeightFilament 100—800 g/m²; staple 100—600 g/m²
Width2—6 m, custom available
Roll lengthMade to order
FunctionsFiltration / separation / drainage / reinforcement / protection
SupplyStock weights · custom made
Values follow the official standard text and the batch test report; where the project specifies otherwise, the design document governs.

Grades and common specifications

GradeKey valueTypical use
200 g/m² Filament Geotextile200 g/㎡200 g/㎡
300 g/m² Filament Geotextile300 g/㎡300 g/㎡
400 g/m² Filament Geotextile400 g/㎡400 g/㎡

200 g, 300 g and 400 g are normally held in stock. Higher weight raises tensile strength and puncture resistance at a higher price; specify to the design indices rather than adding weight unnecessarily.

Typical applications

Installation points

  1. Prepare the groundRemove sharp objects, grade the surface, drain soft spots first so the fabric is not torn by local settlement.
  2. LayLay along the principal stress direction, taut but not stretched, keep the specified overlap and weight down temporarily on slopes.
  3. Overlap and sewOverlap as designed, typically 100—200 mm; sew or heat-bond at critical locations with seam strength not below the design value.
  4. AnchorAnchor trenches or ballast at crest and toe to prevent sliding and wind uplift.
  5. Protect and backfillCover promptly with gravel, soil or concrete; avoid prolonged UV exposure and never track plant directly on the fabric.

Related projects

Geotextile FAQ

Filament vs staple fibre?

Filament spunbond has continuous fibres, higher tensile strength and better creep behaviour, suited to reinforcement, roadbeds and dam fills. Staple needlepunched is uniform and cost-effective for filtration, separation and general protection. Select against the design strength indices.

Which weight?

200—300 g/m² for filtration and separation; 300—400 g/m² under membranes and for roadbed reinforcement; heavier weights where the design demands higher stress. Weight alone is not enough — check tensile strength and opening size.

What overlap?

Typically 100—200 mm, following the design and relevant code; widen and sew or heat-bond at slopes and scour-prone locations.

Which standards?

Filament geotextile to GB/T 17639-2008, staple to GB/T 17638-2017, batch test reports supplied. Where a project cites another edition or sector standard, follow the design document.

How is price calculated?

From weight, width, roll length, quantity and haul distance; filament costs more than staple. Send weight, width, quantity and delivery address.

Technical notes

Related specifications and uses

Grouped by type, application and search term, so a specific requirement can be matched quickly. All products can be made to project requirements.

geotextilefilament geotextilestaple fibre geotextilenonwoven geotextile suppliergeotextile price200 g geotextile300 g geotextileroadbed geotextile

About the manufacturer

Shandong Hengyang New Materials Co., Ltd. is located on the north side of Beihuan West Road, Lingcheng District, Dezhou, Shandong, producing geomembrane, composite geomembrane, geotextile, tunnel waterproofing membrane, composite drainage geonet, bentonite GCL, ecological bags and cementitious blanket.

The plant covers 29,410 m² with 18,350 m² of buildings and 15 production lines across membrane, fabric, drainage, GCL and blanket. An in-house geosynthetics laboratory issues batch test reports. The company is a drafting unit of GB 45320-2025 and holds construction qualification D237420218, ISO 9001/14001/45001 and CE conformity ICR/VC/HS260757.

  • Hotline+86 156 8951 2579 (Mr. Zhang)
  • AddressBeihuan West Road, Lingcheng District, Dezhou, Shandong 253500
  • Websiteen.hdpem.com
  • ICP鲁ICP备19034158号-6

Send us your project conditions

We reply with datasheets, test reports and a quotation within one business day.

Request a quotationEmail us
Call Top