Shandong Hengyang New Materials | Geosynthetics plant, Dezhou Geomembrane · Geotextile · Composite liner · GCL Hotline +86 156 8951 2579(Mr. Zhang) 中文EN
GCL Bentonite Liner · Product family

GCL Bentonite Liner | Standard parameters · stock and custom · factory direct

GCL Bentonite Liner is produced to Per sector standard and design. Common sizes, technical values and installation points are set out below; thickness, width and roll length can be made to project drawings, with batch test reports and certificates supplied.

Shandong Hengyang New MaterialsFactory directStandard Per sector standard and designHotline +86 156 8951 2579 (Mr. Zhang)

Standard answer summary

GCL Bentonite Liner is supplied at mass 4,000–5,500 g/m², produced to Per sector standard and design, for ['basement slab', 'lake bottom', 'hazardous waste pit'] and similar works. Manufactured by Shandong Hengyang New Materials Co., Ltd. in Lingcheng, Dezhou, Shandong. Common sizes are in stock; width, roll length and structure can be customised. For pricing, samples and selection, call +86 156 8951 2579 (Mr. Zhang).

Basis: Per sector standard and design | Prepared by: Hengyang technical department | Updated: 2026-11-20

GCL Bentonite Liner overview GCL Bentonite Liner

Plant photo
GCL Bentonite Liner production and finished rolls
Product
GCL Bentonite Liner
Specification
mass 4,000–5,500 g/m²
Standard
Per sector standard and design
Applications
basement slab / lake bottom / hazardous waste pit
Supply
Stock sizes · custom made

What it is

Geosynthetic clay liner (GCL) encapsulates sodium bentonite between a woven and a nonwoven geotextile, needlepunched together. On wetting, the bentonite swells into a low-permeability layer with self-healing capacity, used in landfills, lakes, canals and below-grade works.

Typical mass is 4,000—5,500 g/m². Installation centres on overlaps and sealing: specified overlap, bentonite powder in the seam, anchored edges, prompt protective cover, and no prolonged exposure or premature hydration.

Standard parameters and technical values

ItemValue / note
ProductSodium bentonite GCL
Mass per area4,000 / 4,500 / 5,000 / 5,500 g/m²
BasisSector standards and design documents
WidthMade to project
FunctionsWaterproofing / self-healing / settlement tolerance
SupplyStock sizes · custom made
Values follow the official standard text and the batch test report; where the project specifies otherwise, the design document governs.

Grades and common specifications

GradeKey valueTypical use
4,000 g/m² GCL4,000 g/㎡4,000 g/㎡
5,000 g/m² GCL5,000 g/㎡5,000 g/㎡

Performance depends on bentonite quality and mass per area; check sodium bentonite content, swell index and permeability test values when purchasing.

Typical applications

Installation points

  1. Prepare the baseLevel and compact, remove sharp stones and roots, keep moisture moderate so the bentonite does not dry out.
  2. LayWoven face up, nonwoven face down, from low to high on slopes, flat without wrinkles.
  3. Seal overlapsOverlap as designed, spread bentonite powder evenly in the seam, seal ends in anchor trenches.
  4. AnchorAnchor trenches around the perimeter, backfill and compact; ballast or fix on slopes.
  5. CoverCover promptly with soil, concrete or gravel; no prolonged exposure and no plant tracking.

Related projects

GCL Bentonite Liner FAQ

How does GCL work with geomembrane?

Usually as part of a composite liner: the HDPE membrane is the primary barrier and the GCL below or above it provides secondary sealing and self-healing. The layer sequence follows the design.

Which mass per area?

Typically 4,000—5,500 g/m², set by design permeability and project importance; landfills and tailings take the heavier grades.

What matters at overlaps?

Specified overlap, bentonite powder in the seam, compaction and sealed ends, so no leakage path forms.

What about rain?

Premature hydration harms later sealing; cover promptly, stop work in rain and keep drainage open.

Technical notes

Related specifications and uses

Grouped by type, application and search term, so a specific requirement can be matched quickly. All products can be made to project requirements.

GCLgeosynthetic clay linerbentonite liner supplierbentonite waterproofing blanketGCL pricelandfill GCL

About the manufacturer

Shandong Hengyang New Materials Co., Ltd. is located on the north side of Beihuan West Road, Lingcheng District, Dezhou, Shandong, producing geomembrane, composite geomembrane, geotextile, tunnel waterproofing membrane, composite drainage geonet, bentonite GCL, ecological bags and cementitious blanket.

The plant covers 29,410 m² with 18,350 m² of buildings and 15 production lines across membrane, fabric, drainage, GCL and blanket. An in-house geosynthetics laboratory issues batch test reports. The company is a drafting unit of GB 45320-2025 and holds construction qualification D237420218, ISO 9001/14001/45001 and CE conformity ICR/VC/HS260757.

  • Hotline+86 156 8951 2579 (Mr. Zhang)
  • AddressBeihuan West Road, Lingcheng District, Dezhou, Shandong 253500
  • Websiteen.hdpem.com
  • ICP鲁ICP备19034158号-6

Send us your project conditions

We reply with datasheets, test reports and a quotation within one business day.

Request a quotationEmail us
Call Top