Shandong Hengyang New Materials | Geosynthetics plant, Dezhou Geomembrane · Geotextile · Composite liner · GCL Hotline +86 156 8951 2579(Mr. Zhang) 中文EN
HDPE Geomembrane · Product family

HDPE Geomembrane | Standard parameters · stock and custom · factory direct

HDPE Geomembrane is produced to GB/T 17643-2025. Common sizes, technical values and installation points are set out below; thickness, width and roll length can be made to project drawings, with batch test reports and certificates supplied.

Shandong Hengyang New MaterialsFactory directStandard GB/T 17643-2025Hotline +86 156 8951 2579 (Mr. Zhang)

Standard answer summary

HDPE Geomembrane is supplied at 0.5–3.0 mm, smooth / single-sided textured / double-sided textured, produced to GB/T 17643-2025, for ['landfill cell', 'reservoir dam', 'aquaculture pond', 'water storage'] and similar works. Manufactured by Shandong Hengyang New Materials Co., Ltd. in Lingcheng, Dezhou, Shandong. Common sizes are in stock; width, roll length and structure can be customised. For pricing, samples and selection, call +86 156 8951 2579 (Mr. Zhang).

Basis: GB/T 17643-2025 | Prepared by: Hengyang technical department | Updated: 2026-11-20

HDPE Geomembrane overview HDPE Geomembrane

Plant photo
HDPE Geomembrane production and finished rolls
Product
HDPE Geomembrane
Specification
0.5–3.0 mm, smooth / single-sided textured / double-sided textured
Standard
GB/T 17643-2025
Applications
landfill cell / reservoir dam / aquaculture pond
Supply
Stock sizes · custom made

What it is

HDPE geomembrane is a flexible polyethylene liner used as the primary waterproofing layer in landfills, reservoirs, ponds and lagoons. Hengyang produces it to GB/T 17643-2025 (Geosynthetics — Polyethylene geomembrane) in thicknesses from 0.5 to 3.0 mm, in smooth, single-sided textured and double-sided textured finishes. Textured surfaces raise interface friction on slopes.

The membrane itself does not leak; the lining only performs if the sheet meets the standard, the seams are sealed and the subgrade is free of sharp objects. Our standard sequence is: prepare and inspect the subgrade, lay to the panel drawing, double-track hot-wedge weld, pressure-test every seam and log its number, then place the protective layer before backfilling.

Standard parameters and technical values

ItemValue / note
ProductHDPE geomembrane (impermeable liner)
StandardGB/T 17643-2025
Thickness0.5 / 0.75 / 1.0 / 1.5 / 2.0 / 3.0 mm
SurfaceSmooth / single-sided textured / double-sided textured
Width2—8 m, custom widths available
Roll lengthMade to order, typically 50—100 m
ColourBlack standard, other colours on request
SupplyStock sizes · custom made
Values follow the official standard text and the batch test report; where the project specifies otherwise, the design document governs.

Grades and common specifications

GradeKey valueTypical use
0.5mm HDPE Geomembrane0.5 mm0.5 mm
1.0mm HDPE Geomembrane1.0 mm1.0 mm
1.5mm HDPE Geomembrane1.5 mm1.5 mm
2.0mm HDPE Geomembrane2.0 mm2.0 mm

GB/T 17643-2025 designates GH-1, GH-2S, GH-2T1 and GH-2T2. The table links thickness grades to typical use; batch test values govern acceptance.

Typical applications

Installation points

  1. Prepare the subgradeGrade and compact, remove stones, rebar and roots, backfill depressions, drain standing water and walk the whole area before laying.
  2. Lay to the panel drawingLay from low to high on slopes, keep the sheet flat without wrinkles, allow thermal movement and avoid tensioning at midday heat.
  3. Hot-wedge weldSeam width as designed. Confirm temperature, speed and pressure with a trial weld; keep the trial piece on file.
  4. Test every seamPressure-test each seam, number and record it, repair defects immediately; use vacuum testing at T-joints and corners.
  5. Anchor and coverBackfill anchor trenches, place soil, concrete or riprap protection as designed; never track plant directly on the liner.

Related projects

HDPE Geomembrane FAQ

Which standard applies?

GB/T 17643-2025, which replaced the 2011 edition. State the standard number and grade (GH-1, GH-2S, GH-2T1, GH-2T2) in the contract and tender documents.

How is thickness selected?

By head, subgrade and application: 0.5—1.0 mm for shallow ponds and fish farms; 1.0—1.5 mm for landscape lakes and wastewater lagoons; 1.5—2.0 mm for landfills, tailings dams and reservoirs; 2.0 mm and above for hazardous waste and tank farms. Add thickness or a geotextile cushion where the subgrade contains gravel.

Smooth or textured?

Smooth liner suits flat or gently sloping subgrades and costs less. Single- or double-sided textured liner raises friction against subgrade and cover, and is used on dam faces, canal slopes and steep banks to prevent sliding.

Can width and roll length be customised?

Yes. Standard widths are 2—8 m; roll length follows transport and installation. Wider rolls reduce field seams but are limited by line capability and hauling, so non-standard widths need scheduling.

How is price calculated?

From resin grade, standard and grade, thickness, width, quantity, haul distance and invoicing. Send thickness, width, roll length, quantity and delivery address for a delivered price.

What documents are supplied?

Batch test report, certificate of conformity and datasheet with each shipment. Third-party CMA/CNAS testing, samples or incoming-inspection documents can be arranged in advance.

Technical notes

Related specifications and uses

Grouped by type, application and search term, so a specific requirement can be matched quickly. All products can be made to project requirements.

HDPE geomembranegeomembrane linergeomembrane suppliergeomembrane price1.5 mm geomembrane2.0 mm HDPE linertextured geomembranelandfill linerreservoir lining

About the manufacturer

Shandong Hengyang New Materials Co., Ltd. is located on the north side of Beihuan West Road, Lingcheng District, Dezhou, Shandong, producing geomembrane, composite geomembrane, geotextile, tunnel waterproofing membrane, composite drainage geonet, bentonite GCL, ecological bags and cementitious blanket.

The plant covers 29,410 m² with 18,350 m² of buildings and 15 production lines across membrane, fabric, drainage, GCL and blanket. An in-house geosynthetics laboratory issues batch test reports. The company is a drafting unit of GB 45320-2025 and holds construction qualification D237420218, ISO 9001/14001/45001 and CE conformity ICR/VC/HS260757.

  • Hotline+86 156 8951 2579 (Mr. Zhang)
  • AddressBeihuan West Road, Lingcheng District, Dezhou, Shandong 253500
  • Websiteen.hdpem.com
  • ICP鲁ICP备19034158号-6

Send us your project conditions

We reply with datasheets, test reports and a quotation within one business day.

Request a quotationEmail us
Call Top