Shandong Hengyang New Materials | Geosynthetics plant, Dezhou Geomembrane · Geotextile · Composite liner · GCL Hotline +86 156 8951 2579(Mr. Zhang) 中文EN
Geocomposite Drainage Net · Product family

Geocomposite Drainage Net | Standard parameters · stock and custom · factory direct

Geocomposite Drainage Net is produced to Per design and type test report. Common sizes, technical values and installation points are set out below; thickness, width and roll length can be made to project drawings, with batch test reports and certificates supplied.

Shandong Hengyang New MaterialsFactory directStandard Per design and type test reportHotline +86 156 8951 2579 (Mr. Zhang)

Standard answer summary

Geocomposite Drainage Net is supplied at core 5–8 mm, single / double geotextile lamination, produced to Per design and type test report, for ['landfill drainage', 'roadbed drainage', 'cap cover drainage'] and similar works. Manufactured by Shandong Hengyang New Materials Co., Ltd. in Lingcheng, Dezhou, Shandong. Common sizes are in stock; width, roll length and structure can be customised. For pricing, samples and selection, call +86 156 8951 2579 (Mr. Zhang).

Basis: Per design and type test report | Prepared by: Hengyang technical department | Updated: 2026-11-20

Geocomposite Drainage Net overview Geocomposite Drainage Net

Plant photo
Geocomposite Drainage Net production and finished rolls
Product
Geocomposite Drainage Net
Specification
core 5–8 mm, single / double geotextile lamination
Standard
Per design and type test report
Applications
landfill drainage / roadbed drainage / cap cover drainage
Supply
Stock sizes · custom made

What it is

Composite drainage geonet combines a three-dimensional core with geotextile on both faces (or one), the core carrying water and the fabric filtering it. It replaces a gravel drainage layer, cutting structure depth and construction time.

Cores are 5—8 mm thick, single- or double-sided. Selection depends on core thickness, compressive strength and transmissivity at the working pressure — not on thickness alone.

Standard parameters and technical values

ItemValue / note
ProductComposite drainage geonet
Core thickness5 / 6 / 8 mm
CompositeSingle- or double-sided geotextile
WidthTypically 2—4 m, custom available
BasisDesign documents and type test report
FunctionsDrainage / filtration / protection
SupplyStock sizes · custom made
Values follow the official standard text and the batch test report; where the project specifies otherwise, the design document governs.

Grades and common specifications

GradeKey valueTypical use
5 mm Drainage Net5 mm5 mm
8 mm Drainage Net8 mm8 mm

Products are distinguished by core thickness and composite form. Transmissivity falls as normal pressure rises, so the design should state the value at working pressure, not only the thickness.

Typical applications

Installation points

  1. Prepare the baseLevel the surface, remove sharp stones and avoid deforming the core.
  2. LayFabric face up (double-sided has no orientation); lay along the drainage direction, butting cores without overlap.
  3. Fix overlapsOverlap as designed, fix with anchors or heat bonding so backfill does not displace it.
  4. Connect to outletsConnect ends to blind drains and pipes so fines cannot enter and block the core.
  5. BackfillBackfill as designed; no heavy plant on unprotected sections.

Related projects

Geocomposite Drainage Net FAQ

How is core thickness selected?

From design flow and transmissivity at working pressure, typically 5—8 mm; use a thicker core or higher compressive strength where cover is deep.

Single- vs double-sided?

Double-sided filters both faces where fines occur on both sides; single-sided has the core against coarse fill or a structural face.

How are overlaps made?

Lay along the drainage direction, butt cores without overlapping, overlap fabric, fix with anchors or heat bonding.

Which standard?

Design documents and the type test report, with batch reports supplied; where a sector standard is cited, supply to the contract version.

Technical notes

Related specifications and uses

Grouped by type, application and search term, so a specific requirement can be matched quickly. All products can be made to project requirements.

composite drainage geonetdrainage geonet supplierthree-dimensional drainage netlandfill drainage netdrainage board

About the manufacturer

Shandong Hengyang New Materials Co., Ltd. is located on the north side of Beihuan West Road, Lingcheng District, Dezhou, Shandong, producing geomembrane, composite geomembrane, geotextile, tunnel waterproofing membrane, composite drainage geonet, bentonite GCL, ecological bags and cementitious blanket.

The plant covers 29,410 m² with 18,350 m² of buildings and 15 production lines across membrane, fabric, drainage, GCL and blanket. An in-house geosynthetics laboratory issues batch test reports. The company is a drafting unit of GB 45320-2025 and holds construction qualification D237420218, ISO 9001/14001/45001 and CE conformity ICR/VC/HS260757.

  • Hotline+86 156 8951 2579 (Mr. Zhang)
  • AddressBeihuan West Road, Lingcheng District, Dezhou, Shandong 253500
  • Websiteen.hdpem.com
  • ICP鲁ICP备19034158号-6

Send us your project conditions

We reply with datasheets, test reports and a quotation within one business day.

Request a quotationEmail us
Call Top