The new geomembrane standard, in plain terms
2026-06-15 · Written by Hengyang Technical Department · Reviewed by Zhang (engineering procurement) · Sources: current standards and batch test reports
Standard answer summary
GB/T 17643-2025 replaces the 2011 edition from 1 November 2025. Maintained by the Hengyang technical department; values follow the current standard, design document and batch report. Call +86 156 8951 2579 (Mr. Zhang).
Source: Hengyang technical department | Updated: 2026-11-20GB/T 17643-2025, the standard for polyethylene geomembrane, takes effect on 1 November 2025 and replaces GB/T 17643-2011. For buyers the practical question is not the standard number but whether the test report on the desk cites the right edition and the right grade.
Grade designations: the current edition keeps the GH series with GH-1, GH-2S, GH-2T1 and GH-2T2, distinguished by resin type and surface. A report that still quotes the old designation scheme without the grade should be questioned.
Index values: density, tensile yield strength, elongation at break, tear resistance, puncture resistance and carbon black content are the routine items. The values and tolerances were adjusted for part of the range, so comparing a 2011 report with a 2025 requirement line by line is the fastest way to see a mismatch.
Test methods: where test methods were revised, the report should cite the method edition as well. This is the detail most often missed in a submission, and it is the easiest to verify.
What to do: ask for the report cover page and the page listing index values, check the standard number, the year, the grade and the test method editions, then check the batch number against the delivery. If the project was designed against the 2011 edition, the specification still governs until the design is updated — the standard change does not automatically change the contract.
Related materials and scenarios
Geomembrane specificationStandards tableScenario: landfill
Does the new standard apply to old projects?
The contract and design file govern. For new tenders after 1 November 2025, specify GB/T 17643-2025 and ask suppliers to declare the grade.
Is a CE certificate enough?
No. CE marking under EN 13249 and EN 13492 supports export compliance; Chinese projects still require reports against the GB standard and the grade.
Send us your project conditions
We reply with datasheets, test reports and a quotation within one business day.