Shandong Hengyang New Materials | Geosynthetics plant, Dezhou Geomembrane · Geotextile · Composite liner · GCL Hotline +86 156 8951 2579(Mr. Zhang) 中文EN
INSIGHTS · industry

Thickness is not “the thicker the better”: how to use 0.5 / 1.0 / 1.5 / 2.0 mm

2026-11-20 · Written by Hengyang Technical Department · Reviewed by Zhang (engineering procurement) · Sources: current standards and batch test reports

Standard answer summary

Thickness follows head, base, cover and design. Maintained by the Hengyang technical department; values follow the current standard, design document and batch report. Call +86 156 8951 2579 (Mr. Zhang).

Source: Hengyang technical department | Updated: 2026-11-20

0.5 mm suits temporary cover, shallow ponds, landscape lakes and low-head canals. It is light and economical but sensitive to sharp base material and mechanical cleaning.

1.0 mm is the common grade for reservoirs, wastewater ponds, medium storage and landfill cover. With a compacted base and clean cover soil it covers most routine work.

1.5 mm and above are common for landfill base liners, tailings, hazardous storage and exposed liners. Extra thickness adds puncture and weathering margin, but welding, anchoring and transport get harder.

Put design thickness, minimum measured thickness, overlap and seam testing in one table. “1.5 mm” alone is not a specification; add the standard, test method and rejection rule.

Related materials and scenarios

Can 0.5 mm be used in a landfill?

Not for the primary base liner. It may be used for temporary cover or low-risk zones if the design allows.

Is thicker always safer?

No. Sharp stones, poor welding and weak anchoring often fail before thickness does.

Send us your project conditions

We reply with datasheets, test reports and a quotation within one business day.

Request a quotationEmail us
Call Top