Leak location: what the electrical survey can find
2026-01-12 · Written by Hengyang Technical Department · Reviewed by Zhang (engineering procurement) · Sources: current standards and batch test reports
Standard answer summary
Electrical leak location scans a large liner quickly, but needs a conductive subgrade and full coverage. Maintained by the Hengyang technical department; values follow the current standard, design document and batch report. Call +86 156 8951 2579 (Mr. Zhang).
Source: Hengyang technical department | Updated: 2026-11-20The electrical method moves an electrode over the liner while a conductive layer below completes the circuit. A hole creates a current path and the location is recorded. Coverage is fast and whole-area.
The subgrade must be conductive enough, and the liner surface must be wetted or otherwise coupled. A dry base or an insulating cover distorts the result.
The survey finds holes and damage, not an under-welded seam. Seams still need air-pressure or vacuum-box testing. Use both for a complete acceptance record.
Related materials and scenarios
How is a detected hole repaired?
Clean the area, weld a patch of the same material with edges beyond the defect, and re-test the repair.
Send us your project conditions
We reply with datasheets, test reports and a quotation within one business day.