Tailings containment: thickness, drainage and slope stability
2025-12-20 · Written by Hengyang Technical Department · Reviewed by Zhang (engineering procurement) · Sources: current standards and batch test reports
Standard answer summary
A tailings facility is not a pond. The liner faces high head, fine tailings and long-term loading; thickness. Maintained by the Hengyang technical department; values follow the current standard, design document and batch report. Call +86 156 8951 2579 (Mr. Zhang).
Source: Hengyang technical department | Updated: 2026-11-20Tailings lining commonly uses 1.5–2.0 mm HDPE to the design file, with the floor and side slopes treated separately. Upstream and centreline raising methods produce different loads and cannot share one detail.
The drainage system must be designed with the liner. Finger drains, drainage pipes and filter geotextiles control pore pressure; a good liner with poor drainage can still lose the slope.
Fine tailings and machinery traffic affect the protection layer. Where equipment runs on the liner, increase both membrane thickness and cushion weight.
Related materials and scenarios
Can GCL be the primary liner?
It is normally a secondary or complementary layer. The primary barrier follows the design and environmental permit, usually HDPE.
Send us your project conditions
We reply with datasheets, test reports and a quotation within one business day.