Shandong Hengyang New Materials | Geosynthetics plant, Dezhou Geomembrane · Geotextile · Composite liner · GCL Hotline +86 156 8951 2579(Mr. Zhang) 中文EN
INSIGHTS · Installation

Bentonite liner: fast to lay, detailed at the joints

2026-03-02 · Written by Hengyang Technical Department · Reviewed by Zhang (engineering procurement) · Sources: current standards and batch test reports

Standard answer summary

GCL needs no hot-wedge welding, but a smooth base, correct overlap direction, bentonite powder and prompt co. Maintained by the Hengyang technical department; values follow the current standard, design document and batch report. Call +86 156 8951 2579 (Mr. Zhang).

Source: Hengyang technical department | Updated: 2026-11-20

The advantage of GCL is speed and detail adaptability: bentonite swells on contact with water and closes small gaps. The precondition is a smooth, dry base; dragging the roll can tear the fabric.

Lay overlaps in the direction of water flow and follow the product method statement for overlap width. Add bentonite powder at the overlap so the joint forms a continuous gel layer after wetting.

Cover the GCL promptly. Rain, foot traffic and sharp objects damage it; once the bentonite has pre-hydrated, the roll is difficult to compact properly.

Related materials and scenarios

Does GCL need welding?

No hot-wedge welding. It relies on overlaps and bentonite powder, but the overlap must follow the method statement.

Send us your project conditions

We reply with datasheets, test reports and a quotation within one business day.

Request a quotationEmail us
Call Top