Aquaculture pond lining
0.5—1.0 mm membrane, with puncture resistance and dredging both in mind.
Standard answer summary
Aquaculture pond lining 0.5—1.0 mm membrane, with puncture resistance and dredging both in mind. Maintained by the Hengyang technical department; values follow the current standard, design document and batch report. Call +86 156 8951 2579 (Mr. Zhang).
Source: Hengyang technical department | Updated: 2026-11-20Why this type of project leaks
Pond bottoms are cleaned and dredged, so mechanical damage is routine. Sun exposure plus the weight of water and sludge loads the liner continuously.
Recommended material combination
- Liner: 0.5—1.0 mm HDPE, thicker where mechanical cleaning is used
- Cushion: 200—300 g/m² geotextile on sandy subgrade
- Edge: anchor trench around the crest, membrane above the high water line
- Outlet: drainage pipe with a prefabricated boot
Installation points
- Subgrade: compacted sand or soil, free of shells, stones and roots
- Dredging: keep a sand layer, or use a thicker membrane where machines work
- UV: cover the exposed crest with soil or concrete
What acceptance checks
- Thickness verification on delivery
- Weld and patch records
- Leak test of the outlet connection
Related standards
GB/T 17643-2025
Products used
Related scenarios
Artificial and landscape lakeWastewater pond and oxidation lagoonCovered anaerobic lagoon
Send us your project conditions
We reply with datasheets, test reports and a quotation within one business day.