Luotian county landfill containment
County-level landfill cell: 1.5 mm HDPE membrane on base and slopes, textured slope membrane, geotextile above and below.
Standard answer summary
Luotian County, Hubei, China 2024, County-level landfill cell: 1.5 mm HDPE membrane on base and slopes, text. Maintained by the Hengyang technical department; values follow the current standard, design document and batch report. Call +86 156 8951 2579 (Mr. Zhang).
Source: Hengyang technical department | Updated: 2026-11-20
| Location | Luotian County, Hubei, China |
| Year | 2024 |
| Material supplied | 1.5 mm HDPE geomembrane, geotextile |
A county landfill is modest in scale, but the requirements on material consistency and weld quality are no lower for that.
Base and slopes use 1.5 mm HDPE geomembrane; slopes take textured membrane for friction; geotextile sits above and below as protection.
Welds are sampled to the specification, with T-junctions and the anchor trench treated as the priority inspection points.
Acceptance at a county landfill is about details: anchor trench section and backfill, reinforcement at T-joints and pipe entries, and weld numbers that match the test log. Even on a small cell, an electrical leak survey by zone pays for itself by locating defects later.
For a comparable small or medium landfill, confirm design thickness and slope angle first. On steeper slopes use textured sheet and check interface friction; where a gravel drainage layer sits on the base, geotextile mass and membrane thickness have to be decided together rather than adding membrane alone.
What this means for a similar site
The same logic applies: read the base and the load first, then the head and the medium, and let the design documents fix the thickness. Material selection answers the design, it does not replace it.
Topics
Landfill cellHDPE geomembraneLeakage detection
Send us your project conditions
We reply with datasheets, test reports and a quotation within one business day.